Fischer Panda 60i 400V PMS Generator: Ultra-Quiet 60kVA 3-Phase Variable-Speed Power
The ultimate 3-phase powerhouse for 90-150ft superyachts and expedition vessels—60kVA peak (48kW continuous) at 400V 50Hz with only 58 dB(A) @ 7m and full variable-speed iControl2 technology.
At Wave Inboard Motors, the 60i 400V PMS has set the standard for 3-phase generators on 90-150ft yachts since 2023—with over 70 units installed from Florida to the Med. Owners running massive loads (quad 40k BTU chillers, hydraulic systems, large watermakers, or full 3-phase galleys) love that it delivers 60kVA peak (48kW continuous) at 400V 50Hz three-phase while remaining quieter than most 30kW fixed-speed units and weighing just 750 kg (1,653 lbs). If you’re replacing an old Onan 55-65MDK 3-phase, Northern Lights 55-65kW 3-phase, or Kohler 55-65EKOZD 3-phase, our marine generator installation service can usually complete the swap in 7-10 days with full iControl2 and Fischer Panda Cloud connectivity.
The Fischer Panda 60i 400V PMS is built around a water-cooled Deutz BF6M 1013 six-cylinder diesel with permanent-magnet alternator and variable-speed iControl2 that adjusts RPM to load—saving 25-35% fuel vs fixed-speed units and dropping noise dramatically at part load.
Technical Specifications
| Specification | Details |
|---|---|
| Model | 60i PMS – 400V 3-phase (FPMA1102) |
| Continuous Output | 48 kW / 60 kVA @ 0.8 pf (3-phase) |
| Peak Output | 60 kVA (short term) |
| Voltage / Frequency | 400V 3-phase / 230V single-phase 50Hz |
| Engine | Deutz BF6M 1013 6-cylinder diesel |
| RPM Range | 1400–2600 rpm (variable speed) |
| Cooling | Freshwater with seawater heat exchanger |
| Noise Level | 58 dB(A) @ 7m |
| Dry Weight | 750 kg (1,653 lbs) |
| Dimensions (L×W×H) | 1430 × 720 × 880 mm (56.3 × 28.3 × 34.6 in) |
| Fuel Consumption | 6.5–14.0 L/hr (load dependent) |
| Alternator | Permanent magnet, brushless, water-cooled |
| Control | iControl2 panel + Fischer Panda Cloud |
| Certifications | CE, RCD, EPA Tier 3 ready |
Competitor Comparison
| Feature | Fischer Panda 60i 400V PMS | Onan MDKDV 65kW 3-phase | Northern Lights M65C3 65kW 3-phase |
|---|---|---|---|
| Continuous Power | 48 kW / 60 kVA | 65 kW | 65 kW |
| Noise @ 7m | 58 dB(A) | 70 dB(A) | 68 dB(A) |
| Weight (dry) | 750 kg | 1,300 kg | 1,500 kg |
| RPM | Variable 1400-2600 | Fixed 1500 | Fixed 1800 |
| Fuel Consumption (75% load) | ~10.0 L/hr | ~13.5 L/hr | ~14.0 L/hr |
| Cooling | Freshwater + heat exchanger | Freshwater + heat exchanger | Freshwater + heat exchanger |
| Digital Control / Remote | iControl2 + Cloud app | Basic panel | Basic panel |
| Price (2025 est.) | $95,000-$105,000 | $98,000-$110,000 | $102,000-$115,000 |
Verdict: The Fischer Panda 60i 400V PMS dominates for 90-150ft yachts needing clean 3-phase power—variable speed saves 25-35% fuel and drops noise to unheard-of levels. Onan and Northern Lights are solid commercial units, but for premium yachts where silence and weight matter, the 60i PMS wins every time. In our 2025 installs, 99% of 3-phase clients in this size range chose Panda.
Replacement & Installation Options
| Scenario | Recommended Path | Cost Range (2025) | Downtime |
|---|---|---|---|
| Old Onan 55-65kW 3-phase swap | Direct swap 60i 400V PMS | $110K-$125K installed | 7-10 days |
| Northern Lights 55-65kW | 60i 400V PMS + adapter plate | $112K-$130K installed | 8-11 days |
| Need 70-80kVA 3-phase | Step up to Panda 80i 400V PMS | $135K-$155K | 9-12 days |
Our marine generator installation service includes custom 3-phase distribution, exhaust, and full iControl2/Cloud setup—many 100-140ft yachts gain usable storage.
Pros and Cons
| Pros | Cons |
|---|---|
| Ultra-quiet 58 dB(A) @ 7m | Premium pricing |
| Variable speed = 25-35% fuel savings | Freshwater cooling (annual service) |
| Light 750 kg for 60kVA 3-phase | Six-cylinder (still very smooth) |
| iControl2 + Cloud remote monitoring | 50Hz 400V standard (60Hz available) |
| Clean 3-phase inverter output | Largest in i-Series footprint |
Frequently Asked Questions (FAQs) About the Fischer Panda 60i 400V PMS Generator
From 70+ 3-phase installs:
Is the 60i 400V PMS really only 58 dB(A) at 7 meters?
Yes—independent tests and our measurements confirm 57-59 dB(A). Owners say “can’t hear it from the cockpit at anchor.”
Variable speed vs fixed—real fuel saving on 3-phase?
25-35% in typical yacht use. At 50% load it runs ~1900 rpm and burns ~10.0 L/hr vs 13.5 L/hr fixed.
Freshwater cooling—more maintenance than Paguro?
Yes—annual exchanger/impeller clean, but smoother running and no corrosion like seawater units.
Can the 60i 400V PMS run five 32,000 BTU air-conditioners?
Yes—full 48kW handles five 32k BTU plus watermaker/lights on 3-phase; soft-start recommended.
iControl2 and Cloud—what’s possible on 3-phase?
Same as single-phase—remote start/stop, load monitoring per phase, fault alerts, GPS tracking, predictive maintenance.
Parts availability USA 2025?
We stock full 3-phase kits in Florida (injectors, pumps, exchangers)—24-48 hour delivery nationwide.
[Image: FAQ icons with 3-phase symbols. Alt text: “FAQs on Fischer Panda 60i 400V PMS 60kVA 3-phase generator 2025.” (SEO Tip: Schema FAQPage; snippet-ready.)]
Ready for silent 3-phase power? Contact us for 60i 400V PMS pricing and fitment survey—we’ll confirm it fits your boat in 24 hours.
Reviews
There are no reviews yet.